Locomotives 'Starting Up'

[Chrissaf]

Hi All i am on E Link some of my Locomotives with tts sound are starting up on there own when. the E Link has been turn on for a time i have not toll them to start. any i dears. thank Ron.

[Chrissaf]

Check your power connectors on the track to ensure that they are not DC Analogue versions. Remove any capacitors that you find in any DC Analogue versions that you have on the layout.

.

/media/tinymce_upload/791adac1fb1bfa0b8aabb3813cc97b38.jpg

.

[ron 47]

HI all the rail power wiers are solderd to the track and Hornby power boster in line.

thank Ron 47

[96RAF]

How is your booster connected. Can you post a diagram of the wiring and where it is connected to.

How big is your layout that it needs a booster.

[jane1707819582]

HI all the rail power wiers are solderd to the track and Hornby power boster in line.

thank Ron 47

Hi Ron .I  too have experienced this ,I use a different controller ,No booster and soldered connections.Which loco's have you had issues with ?.the fault has now cleared itself the only thing I have done is to take the loco off the track for a while .

[96RAF]

What kind of a power bus do you have if any, or it just the controller feeds soldered to the rails. I saw similar behaviour when I had a single feed to a triple loop circuit with thin jumper wires between loops.