dps Posted April 6, 2020 Share Posted April 6, 2020 I cannot for some reason reprogram this to the full engine number it will only seem to accept 3 digits ie 472 - any ideas? Link to comment Share on other sites More sharing options...
Chrissaf Posted April 6, 2020 Share Posted April 6, 2020 What controller are you using?If a Hornby one.....what firmware revision number is it?(Elite firmware version appears briefly on LCD screen during power up.).Note: If a Select, the only valid loco numbers are between 01 and 59, thus a Select cannot do what you want..TIP: As a newbie poster on the forum, just be aware that the 'Blue Button with the White Arrow' is not a 'Reply to this post' button. If you want to reply to any of the posts, scroll down and write your reply in the reply text box at the bottom of the page and click the Green 'Reply' button..See also – further TIPs on how to get the best user experience from this forum.https://www.hornby.com/uk-en/forum/tips-on-using-the-forum/. Link to comment Share on other sites More sharing options...
jcrooke Posted May 13, 2020 Share Posted May 13, 2020 This is really interesting Link to comment Share on other sites More sharing options...
Howbi Posted May 13, 2020 Share Posted May 13, 2020 Have you read the information regarding how to configure Long (4 digit) addressing in CV29....... look here.. http://www.2mm.org.uk/articles/cv29%20calculator.htm ...........HB Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now