kew8 Posted June 10, 2020 Share Posted June 10, 2020 Anybody fitted a decoder to the above centenary model ? if so what did you use and where did you put it? Link to comment Share on other sites More sharing options...
Bulleidboy Posted June 10, 2020 Share Posted June 10, 2020 Hi kew8 - if you look under "Help & ADvice" it shows how to fit a decoder to a "standard" 0-4-0. The centenary model is a reliveried model of one that has appeared in previous years. BB https://www.hornby.com/uk-en/hornby-dcc/decoder-installation-guides/standard-0-4-0-decoder-installation-guide/ Link to comment Share on other sites More sharing options...
Howbi Posted June 10, 2020 Share Posted June 10, 2020 Hornby 4 pin decoder leads soldered to the pickup wires and motor after removing the suppression capacitor........HB/media/tinymce_upload/4316662e51835e36b9eb8d1e532d905a.jpg Link to comment Share on other sites More sharing options...
Howbi Posted June 11, 2020 Share Posted June 11, 2020 @kew8...... just scroll to the bottom of this page and type your reply in the box and hit the green 'reply' button.....HB Link to comment Share on other sites More sharing options...
kew8 Posted June 12, 2020 Author Share Posted June 12, 2020 thanks for your replies, fantastic help thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now