Chrissaf Posted December 15, 2020 Share Posted December 15, 2020 No, sorry not supported. Only the white and yellow wires are directional. Link to comment Share on other sites More sharing options...
Howbi Posted December 15, 2020 Share Posted December 15, 2020 The Green wire is switched via F25. I wonder if it's possible to incorporate a motion sensor in circuit with whatever device you wish to control that would be on when sensing forward movement then off when stationary or possibly a reed switch......care would be needed to avoid exceeding the function load limit of 100mA............HB Link to comment Share on other sites More sharing options...
Chrissaf Posted December 15, 2020 Share Posted December 15, 2020 Bonjour, pour le décodeur de son est-il possible de piloter le fils vert en fonction de la direction de la locomotive ex: avant ok , arrière stopmerciHello, for the TTS sound decoder - class 47 R8103 is it possible to drive the green wire according to the direction of the locomotive ex: forward ok, back stop thank you Frédéric Labbé Link to comment Share on other sites More sharing options...
ColinB Posted December 17, 2020 Share Posted December 17, 2020 You can do it by adding some extra transistor logic that works using the green, white and yellow wires. I did work out a circuit because I only wanted the cab lights to illuminate in the direction of travel, I never got round to trying it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now