Nick73 Posted March 6, 2021 Share Posted March 6, 2021 Hi, just about to start wiring my points x6 I've got 2 Hornby Accessory Decoders where's best to get the feed for the decoder from the track or straight off the eLink box or something else.Nick Link to comment Share on other sites More sharing options...
Chrissaf Posted March 6, 2021 Share Posted March 6, 2021 Personally, I would avoid using the Hornby track connector included with the R8247 Accessory Decoder. I consider it a fault liability in the longer term.I much prefer using 'hard wired' DCC connections as much as possible for their more robust longevity. I suggest connecting the R8247's directly to the eLink TRACK A&B output something like this. Link to comment Share on other sites More sharing options...
Nick73 Posted March 7, 2021 Author Share Posted March 7, 2021 Hi thank you for the diagram and advice Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now