Gary 1707822344 Posted August 2, 2021 Share Posted August 2, 2021 I have new Lais Decoders for five of my locos they work well with the Elite but not with the Select Walkabout it does not recognise the decoder. Has anyone had this problem.Gary Link to comment Share on other sites More sharing options...
RDS Posted August 2, 2021 Share Posted August 2, 2021 @GaryHopefully someone will answer your question soonModerator Note:Could you please select the 'View my Community’ in your Dashboard on the Forum and choose a nickname in the ‘My profile' tab, rather than your First name that has been automatically allocated by the system. Hopefully a Forum change is coming soon to prevent this automatic allocation but a manual change is required at the moment and there will be more than one member with your name. Link to comment Share on other sites More sharing options...
Fishmanoz Posted August 3, 2021 Share Posted August 3, 2021 Gary, what’s the firmware status of your Selects (first pair of 3 pairs of numbers that appear on startup)? If not either 1.6 or 2.0 (same firmware, different hardware model), consider getting Hornby to upgrade to the latest for a start. Contact HCC to get a returns number, charge £15 plus postage to them. Link to comment Share on other sites More sharing options...
Chrissaf Posted August 3, 2021 Share Posted August 3, 2021 What DCC Addresses are you using for these decoders? The Select in Walkabout mode can only control decoders that are in the 01 to 59 address range. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now