DaveMombasa Posted July 26, 2022 Share Posted July 26, 2022 Hi, Struggling to know how to remove the tender on the dcc tender of this merchant navy rebuilt loco. Back screws ok but cannot release the front - clips?RegardsDave Link to comment Share on other sites More sharing options...
ColinB Posted July 26, 2022 Share Posted July 26, 2022 It might be that this is the first time it has been taken apart. On a lot of my new locos, the paint acts like glue. I can't remember if you pull backwards or forwards on this one to release the body. I have been known to go round the base with a thin blade to release the paint. Link to comment Share on other sites More sharing options...
DaveMombasa Posted July 26, 2022 Author Share Posted July 26, 2022 Thanks Colin - I'll try tomorrow. Link to comment Share on other sites More sharing options...
Going Spare Posted July 26, 2022 Share Posted July 26, 2022 If I remember correctly, you gently ease the body backwards as you lift the back end upwards, the front clips are relatively fragile. Link to comment Share on other sites More sharing options...
96RAF Posted July 26, 2022 Share Posted July 26, 2022 Is that the tender where either the ladder and/or the handbrake wheel is attached to both body and chassis and need detaching else they break. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now