Jump to content

What's on your Workbench?


Recommended Posts

So, having suggested this as a thread yesterday and been told to get on with it - lets give it a go. 🙃

This is a thread I've seen on a few other forums, one which seems to be quite popular, the intention being that we can just post up the odd photo of what we're working on at the moment - builds that we've not, for one reason or another, started a dedicated build thread for. 

Anyway, here's what I've been working on over the weekend - I've added the decals to my Airfix 1/72 Curtis Hawk 91-A-2... 

spacer.png 

I've also finished up the PM Model F-5A I've been working on for a few months. 

spacer.png

 

So - Over to you... (oh and Happy Workbench Wednesday!)

Edited by A J Rimmer
  • Like 3
Link to comment
Share on other sites

1 minute ago, SD45elect2000 said:

Slow going on this one. Lots of colors and tons of decals to do.

Randall

 

...

That's stunning! I take it the stars and bars on the top wing are supposed to be like that - as if they've been worn off? 

Link to comment
Share on other sites

43 minutes ago, Valhalla said:

Who makes these ones Randall? I was looking for another one to do

Ian

These two are by Sword. So so kit, some nice things and some not so nice. They come in a “dogfight double” set with a sea gladiator.

 

Randall

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Apart from the 1/24 Spitfire review build, I also have the following on my bench:

I started two sets of Airfix 1/9 England Stars in the ATF 18th Anniversary Group Build. They are taking a bit longer than I anticipated. Here's where I am with the 8 figures.

53933437451_6ccd69c89b_z.jpg
 
I'm also starting a vehicle GB on the ATF with this one.
53926037517_273f6f1f9a_z.jpg
I'm experimenting with primers and paints. I’ve never achieved a good finish on the paintwork of me previous car builds, and so sought advice for a good primer colour. I have been advised that white, yellow and pink are good primers for red cars and so set about experimenting before committing to the body shell. Firstly I sprayed Ammo Mig One Shot Primer A.Mig 2022 White over a test piece (an old Mosquito wing. To this I added a drop of Vallejo Model Air 71003 Scarlet Red RAL3020 FS31400 to make pink and this was sprayed over the wing tip. Vallejo Model Air 71002 Medium Yellow RAL1003 was sprayed over the centre section. It was then set aside to allow the paint to fully cure.
53930392736_30ee01af2d_z.jpg
I sprayed Vallejo Model Air 71084 Fire Red over the leading edge and Vallejo Model Air 71085 Italian Red over the trailing edge to see which looked best.
53933891070_7f0f8764b3_z.jpg
 
I like to have some 1/72-6 figures on the go in the background. Progress is spasmodic, while other builds are worked on. Don't count the chevrons on the drummers' sleeves.
53916704399_46649007f0_z.jpg
I couldn't squeeze them all in
53916602928_564c422c09_z.jpg
The other bandsmen were not so complicated.
53916704384_bb43227244_z.jpg
 
  • Like 4
Link to comment
Share on other sites

2 hours ago, Ratch said:

Apart from the 1/24 Spitfire review build, I also have the following on my bench:

I started two sets of Airfix 1/9 England Stars in the ATF 18th Anniversary Group Build. They are taking a bit longer than I anticipated. Here's where I am with the 8 figures.

53933437451_6ccd69c89b_z.jpg
 
I'm also starting a vehicle GB on the ATF with this one.
53926037517_273f6f1f9a_z.jpg
I'm experimenting with primers and paints. I’ve never achieved a good finish on the paintwork of me previous car builds, and so sought advice for a good primer colour. I have been advised that white, yellow and pink are good primers for red cars and so set about experimenting before committing to the body shell. Firstly I sprayed Ammo Mig One Shot Primer A.Mig 2022 White over a test piece (an old Mosquito wing. To this I added a drop of Vallejo Model Air 71003 Scarlet Red RAL3020 FS31400 to make pink and this was sprayed over the wing tip. Vallejo Model Air 71002 Medium Yellow RAL1003 was sprayed over the centre section. It was then set aside to allow the paint to fully cure.
53930392736_30ee01af2d_z.jpg
I sprayed Vallejo Model Air 71084 Fire Red over the leading edge and Vallejo Model Air 71085 Italian Red over the trailing edge to see which looked best.
53933891070_7f0f8764b3_z.jpg
 
I like to have some 1/72-6 figures on the go in the background. Progress is spasmodic, while other builds are worked on. Don't count the chevrons on the drummers' sleeves.
53916704399_46649007f0_z.jpg
I couldn't squeeze them all in
53916602928_564c422c09_z.jpg
The other bandsmen were not so complicated.
53916704384_bb43227244_z.jpg
 

Great stuff Richard, I always like your figures. 

Great bit of experimenting on the reds - what are you going to go for? I like the look of the Italian Red (on the trailing edge) over the yellow. 

  • Thanks 1
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
  • Create New...