smartroad Posted February 2, 2013 Share Posted February 2, 2013 When my Select starts up it has a code of 11 and 30 where the instructions say it should be 10 and 30. I can't find any information about the codes and meanings so far via Google or site search. Anyone point me in the right direction? Many thanks for any help!! Link to comment Share on other sites More sharing options...
Gregd99 Posted February 2, 2013 Share Posted February 2, 2013 these values, I believe, correspond to the firmware version. 11 means version 1.1 as opposed to the original 1.0. Link to comment Share on other sites More sharing options...
Fishmanoz Posted February 3, 2013 Share Posted February 3, 2013 My Select Manual says that it should display 11 then 30 then 03, this being a system test before going to the default address. In fact it shows 12 30 03. So I agree the first numbers are firmware version with mine being 1.2. The 30 will be some sort of self test result or checksum. I think the point is, no matter whether it shows 10, 11 or 12, it is operating normally. Link to comment Share on other sites More sharing options...
smartroad Posted February 3, 2013 Author Share Posted February 3, 2013 Thanks for the replies. That now makes a bit more sense! Cheers for the assistance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.