doublecee Posted April 11, 2013 Share Posted April 11, 2013 Hi. My Clive sounds like its under water at low speeds. The short and long whistles (F4 & F2) sound very bubbly. OK at running speed, but quite poor at low. Anyone else have this issue. Using an Elite Thanks Link to comment Share on other sites More sharing options...
doublecee Posted April 12, 2013 Author Share Posted April 12, 2013 Found the issue... It had shipped from TMC with ALL the CV's all over the place. Default 008 to 008 and all is well. Does lead me to believe though that it should have shipped with default CV's intact Link to comment Share on other sites More sharing options...
2e0dtoeric Posted April 13, 2013 Share Posted April 13, 2013 Quality control - lack of - again! Link to comment Share on other sites More sharing options...
walkingthedog Posted April 13, 2013 Share Posted April 13, 2013 2e0dtoeric said: Quality control - lack of - again! Might have been done by TMC. They specialise in weathered finishes. Could be they removed the body and caused the fault. Link to comment Share on other sites More sharing options...
doublecee Posted April 16, 2013 Author Share Posted April 16, 2013 No. Have been in touch with TMC, and he said he just had to back a few to hornby recently with the exact sam problem. Poor sound and no controllability. He wished he'd known that the CV's were all out awhack. So this is defo an oversight at Hornby, Im afraid to say. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.