bf100uk Posted June 17, 2013 Share Posted June 17, 2013 hi can any one help me i have a eurostar which we used to run on just a dc rack we ugradded our layout to dcc i chipped all my trains including my eurostar which was dcc ready so all i needed to do was slot the chip in after programing it worked very well but one day it was only going at half its normal speed i have cleaned all the wheels and the pickups can any one give me any ideas as what to do the only things i have not done is change the motor or change the dcc chip please help Link to comment Share on other sites More sharing options...
poliss Posted June 17, 2013 Share Posted June 17, 2013 Do you have the Elite? If so, then try resetting the decoder. Link to comment Share on other sites More sharing options...
bf100uk Posted June 17, 2013 Author Share Posted June 17, 2013 no i only have the select unit Link to comment Share on other sites More sharing options...
poliss Posted June 17, 2013 Share Posted June 17, 2013 You could try swapping decoders from another loco. Then you'll know if the problem is with the loco or the decoder. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.