Rabb1981 Posted January 2, 2014 Share Posted January 2, 2014 Hi Well I have been trying for over four hours to get two sets of points to switch at the same time. I currently have them on my track layout set at 1 & 2. What I cannot figure out is how to program it so if I switch point 1 point 2 also switches. Any help please. Rabb1981 Link to comment Share on other sites More sharing options...
RDS Posted January 2, 2014 Share Posted January 2, 2014 @Rabb1981 I think you set them so that they both have the same ID. Link to comment Share on other sites More sharing options...
Fishmanoz Posted January 2, 2014 Share Posted January 2, 2014 RDS is correct. Give them the same point ID and connect both point motors to that same port number. Now click on either in the schematic and both will change. One possible exception that has been documented on here is the seep point motor which seems to require more current to change such that a single port won't handle two of them. Link to comment Share on other sites More sharing options...
Rabb1981 Posted January 2, 2014 Author Share Posted January 2, 2014 It's OK I was being stupid I missed the big box in the right hand corner for the groups as soon as I it one it all works as expected. Thanks for your time. :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.