RB51 Posted September 30, 2014 Share Posted September 30, 2014 Have you ensured that they "clicked/slid/jumped" into place on the background grid? It bit more difficult with these as the nearest grid junction looks odd - but that is what you need to do. R- Link to comment Share on other sites More sharing options...
geochoice Posted September 30, 2014 Author Share Posted September 30, 2014 Thanks Roger, Just adjusted some and the grey line is back :-) Some do not seem to want to "jump" but will persevere, obviously that is the issue I need address, thank you for your guidance. Geo Link to comment Share on other sites More sharing options...
RB51 Posted September 30, 2014 Share Posted September 30, 2014 It can help to zoom in. Bigger target! R- Link to comment Share on other sites More sharing options...
geochoice Posted September 30, 2014 Author Share Posted September 30, 2014 Have sorted them now although some of te green and red buttons are on tracks, but generally better thanks. Not tried firing them live yet but there is some significance in placing a firing order I believe now that wasn't there before. Not sure why that should be. Link to comment Share on other sites More sharing options...
St1ngr4y Posted September 30, 2014 Share Posted September 30, 2014 It isn't the point sliding into place on the grid that's important, it is dragging one of the red or green buttons to the centre of the point so that the pair of buttons then "click" into the correct position. Only doing this will ensure that the point will have the blue/gray direction lines when operated.Ray Link to comment Share on other sites More sharing options...
geochoice Posted September 30, 2014 Author Share Posted September 30, 2014 Just connected to elink for the first time since doing the update on RM and it connected first time, and all seems good, thanks Hornby a great improvement, as a non techie I am delighted to have got through the update etc. And for good measure an earlier issue I had with a grey loco box on screen that wouldn't disappear has now gone !Might be worth mentioning in here as I had forgotten others will i am sure that as Roger B said make sure you drag the point buttons to centre of the point to align them properly when redesigning or replacing with the new eight diagonals.All looks very neat and tidy now, worth waiting for - Fishy told me it would be :-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.