GWR Greg Posted January 7, 2015 Share Posted January 7, 2015 Just noticed something. When I move the speed slider using a mouse or touch screen the loco only changes speed when I take my finger of the mouse or stop using touch. I am running 1.59 rev 2. Link to comment Share on other sites More sharing options...
PJR_slo Posted January 7, 2015 Share Posted January 7, 2015 That's probably because the program is written to act on "mouse up" events.Programs like this are "event" driven so that when the operating system notifies the program of an event occurring (such as Mouse Up) the program then takes the appropriate action.Peter Link to comment Share on other sites More sharing options...
HornbyRailMasterSupport Posted January 7, 2015 Share Posted January 7, 2015 RailMaster will send real-time speeds as you slide the throttle. Within your settings "Send real-time speed" must be disabled. You need to enable it and it will then send real time speeds. The default settings is to enable this, so you must have disabled this at some point.You only need to uncheck this setting if you have a very low-powered computer. Link to comment Share on other sites More sharing options...
PJ_model_trains Posted January 7, 2015 Share Posted January 7, 2015 Thank you HRMS for overseeing the forum and for your prompt reply. Link to comment Share on other sites More sharing options...
GWR Greg Posted January 7, 2015 Author Share Posted January 7, 2015 I can only second PJ's comment. Must have unticked at sometime without realizing. All working correctly now!Thanks HRMS.' Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.