Craiggubrath Posted January 11, 2015 Share Posted January 11, 2015 !!!HELP!!!My good lady surprised me with a hornby DCC ready trainset at Christmas, it's the Majestic E-Link with railmaster, probably a bit advanced as I'm new to DCC. I have it all set up and run but I can't get the loco's to run independently, the instructions tell you to change the DCC ID on the CO-CO Class 47 RES which I've tried repeatedly but with no success, The Bon Accord Peppercorn is on ID: 0003 and the CO-CO Class 47 is on ID: 0004 but still only run together on the controls for ID: 0003 and no.4 controls do nothing.Any help would gratefully appreciated but need monkey proof instructions as I'm new to this. Cheers. Link to comment Share on other sites More sharing options...
96RAF Posted January 11, 2015 Share Posted January 11, 2015 WelcomeIf they both run tiogether then No 4 aint number 4 yet.Did you connect a separate bit of track to the eLink Prog terminals before you re-addressed it. If not then thats the way to do it. Link to comment Share on other sites More sharing options...
Fishmanoz Posted January 11, 2015 Share Posted January 11, 2015 Hi Craig, welcome to the forums. Take a look at my first post in the thread "Hello everybody, I'm delighted to be part of the forums" just below yours. It's at the top of page 2. See if that helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.