daveyplod

Hi All, I have found "Magnifier" in my windows settings. Turn on by holding down the windows key and pressing "+". A small panel appears titled magnifier. Default setting for the incremental steps is 100%. This can be altered through "settings" : "accessibility": "magnifier" : and I am now using 25%. This works perfectly in Railmaster and has solved my problem. Thanks to all of you for your helpful suggestions. Daveyplod

Thank you all for your suggestions. I have looked at "magnifier" and it does indeed work within a moveable window. This may well be what I can use. Will let you know.

Thanks PH. I thought that might be the case. Will write to Hornby about improving the visual accessibility of Railmaster for the partially sighted.

I am using Railmaster Pro and the Metallic background. I would like to increase the font size within Railmaster. Increasing the font size through my general laptop windows setting has no effect within the software. Can anyone direct me to where I can change a setting to achieve a larger font.

Thanks to all who contributed to this. Very Informative and helpful. Davey Plod

Thanks, do I also need 2 e links and 2 Pro upgrades?

Is it possible to run Railmaster pro on two laptops running two different layouts?

Well, the reset seems to have worked and all is now well and back to normal. So thanks for the help Chrissaf. Dave A

Thanks Chrissaf, I will try tp re load the software. Yes pd9 1223, my configuration has worked for a number of years now. The loco in question is a Bachmann Class 110 2-car DMU with a Loksound 4 decoder.

elink. Daveyplod

When I start Railmaster and all is loaded and controller initialised, I cannot send any commands to any of my locos. Sound will not turn on nor the locos move. Withe exeption of one loco which runs at c 10 mph with no start command given. Removing this loco from the track means that another loco starts at 10 mph and wont stop until power is off. As far as I know I have the latest software issue and run Pro as well.

Hi, I currently run Railmaster pro on my laptop. I am interested in using my Samsung S6 to help when I am at the "other side " of the layout. How do I go about obtaining the software and also how do I install / run it. Daveyplod

Thanks Chrissaf, I will try again. Daveyplod

Hi, I have recently turned on my PC withe Railmaster Pro connected to an E link and then the track. I am needing to programme an accessory decoder R8247, and so need to connect it to the programme track outputs. When I do this I cannot read the decoder. I have concluded that there is no signal from the programme track outlets on the e link to the decodrr. I cannot measure any signal though the output sockets for the programme track. I get c 16v ac from the normal track out put. The normal track is turned off when using the programme track but there is no current at all detectable. Any ideas please? Daveyplod