Terminator1707822411

Whats the best colour paint for the deck of hms victory model cheers

Thank you for the reply back got a lot to Learn now thanks a lot for the feed back have a nice weekend

All i know it is dcc ready and how do i install a decoder i am new to this dcc

Yes i can here noises the loco i have is the high speed train i am not going to open the case of the loco and do you need anything else for the full trakmat layout wire links ect ect

Yes i programmed it first i pushed the select button then put 6 on pushed the select button again and then at the top it flashed and then the power came on but no moving on the loco

Yes it has a decoder in it and its the first time i tried the loco to move but no chance they must something i have missed like wire links or something else i have got no clues

Hi i have a problem using a select digital controller i put my loco on the track i put the mains on it was 03 on the Led controller i pushed the select to change the address i used 6 pressed the select again 6 came up and flashed on the controller the loco did not move at all the power was there and i have a full trakmat layout any ideas please cheers

Thank you for that, I snipped the brown and green wires and it worked. Thank you again.

Hi i am confused with this how do you connect R406 light signal and R046 on-on lever switch to a analogue controller ( new one) how can you connect the wires when the short brown wire has a tag and the green wire has a tag has well how can you connect when i have the new Analogue ac its impossible i have seen on youtube people use the old controller any ideas i can connect the R406 and R046 to my analogue Ac controller please thank you

Hi 1 Question where do I fit the fishplates on the full Trakmat layout Extension packs A to F please. Thank you.

Thank you for the reply back i have the HST unit its the 1st train on the front on the back of it the axles are abit losse so you can not tightened it up the tracks are ok its just the 1st train on the back wheels

Cheers for the reply it is ok now just a oval layout on the trakmat connected the track powered up and the GWR train ran smoothy but the back derailed on the track the back plate with the wheels needs tighting up how do you do that