null_null981707818155

Hi Gorp, I currently use it with only 2 cars on track as no digital elements and in analogue, and can pit on the arc pro piece (blocking the lane) and refreshes tyres and fuel, what is like to do is do it else where on the track

i have the arc pro and used the official and magic app using the fuel and tyre simulation. However I can only seem to pit on my arc pro track (I.e. the peice with the power supply) over shoot and have to go around again, I am landscaping and creating a pits but without physical seperate pit lane and would like to pit there instead, any idea how to make it so you can pit anywhere (I.e infront of my pits) as can't seem anything in any of the apps cheers Hayden

Yup I am in the process of doing it, need a solenoid train point mover and power supply, just pop into your local train hobby shop and they got all the bits you need :)

Yes using Arc PRO, used multiple cars with same effect, the cars fitted with a digital plug are faster considerably in analogue compared to digital also they have delay after the release of the throttle for a second or so in analogue making slowing for corners tricky as need to dethrottle before would normally in digital. Also the power supply is weird When using as a pace car in analogue as the power ramp is bizarre can't even get it to go round without deslotting or grinding to a halt, plenty of power near base and power taps but power dramitically drops away, When switched to digital the cars deslots after 72% power whilst when in analogue and i have removed the chip I can get it to run round at 58% before deslots at the same corner therefore with the chip in digital it has 14% less power so ideally, any reason why in digital cars 14% slower (can go almost full power round track) Bad behiour of chipped cars in analogue, currently using DPR cars but if I can get cars to behave same in analogue and digital will retrofit some older cars but reluctant unless get better power as no fun flat our most the way round. And like to race chipped vs non chipped cars as expensive an impractical to chip them all thanks

So does digital use more power hence the slower speed? would adding second transformer help?

Hey all, looking for some help! Got the scalextric out after years and built a new permanent track and upgraded to digital. However, when I switch to digital from analogue the cars run noticeably slower, can normally just keep this one on the track (hence broken rear spoiler) but once in digital i can nearly go full throttle through most corners. Any reason why? The chips are c8515 (rev.G), my track is old classic and copper taped (apart from digital elements) as most rails tarnished and have home made jump cables, perfect power all round in analogue but sluggish in digital