HM 6010 [when used with a TT]

[Geronimo13]

I wish to use HM 6010 for turntable operations but how do i control locos on & off turntable if it only controls the turning of it.

[96RAF]

You drive the TT rotation from Port 4 of the HM6010 and you drive the loco on and off using one channel of an HM6000 connected to the TT inlet road.

Note that only Port 4 can be used as it has the extra oomph to drive the TT motor.

Edit - unfortunately it only drives the TT one way as there are only 2-wires to the motor, so at present there is no way to swing it back if you overshoot unless you wire in a reversing switch.