Nick-629323 Posted March 1 Share Posted March 1 Hi, I have two HM7000 decoders, both work excellently on their own. However when I try to run both locomotives together I can only connect to one of the decoders? What am I doing wrong, or missing? Link to comment Share on other sites More sharing options...
96RAF Posted March 1 Share Posted March 1 Not enough info to be able to help. Once both decoders are linked to the app and assigned to their locos they should appear in the app control page ribbon to be selected and controlled as required. Post a picture of your manage devices screen, your engine shed screen and your loco control screen. Link to comment Share on other sites More sharing options...
Nick-629323 Posted March 1 Author Share Posted March 1 Hope these are the right screens Link to comment Share on other sites More sharing options...
96RAF Posted March 1 Share Posted March 1 Only one decoder is connected - blue vs red icon. Until the icon goes blue it will not respond. Check settings page for Bluetoothe Settings - should be Standard. Link to comment Share on other sites More sharing options...
Nick-629323 Posted March 1 Author Share Posted March 1 Bluetooth is set to standard Link to comment Share on other sites More sharing options...
96RAF Posted March 1 Share Posted March 1 What happens to the red one if you take the blue one off track. Link to comment Share on other sites More sharing options...
Nick-629323 Posted March 1 Author Share Posted March 1 Funny you should ask as I have just done that. The loco remaining on the track goes blue and can be controlled. If I put the other loco back on it will remain red? Link to comment Share on other sites More sharing options...
96RAF Posted March 1 Share Posted March 1 It rings a bell. Suggest you bin both by unassigning, delinking and deleting (3 times to force delete if necessary) then rescan, relonk, reassign, etc. Link to comment Share on other sites More sharing options...
Nick-629323 Posted March 1 Author Share Posted March 1 I have also turned my iPad off and back on and that had no effect Link to comment Share on other sites More sharing options...
Nick-629323 Posted March 1 Author Share Posted March 1 OK will give that a go Link to comment Share on other sites More sharing options...
Nick-629323 Posted March 1 Author Share Posted March 1 That seems to have sorted it out and both are running well. Thanks for the help and advice 😎👍 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now