pete007 Posted March 3, 2016 Share Posted March 3, 2016 Hi,Can anyone help me set up my peco double slip crossing on railmaster, I have followed the instructions but I can not tell which route the loco is going to go through as the marker on the points show different to the route the loco takes.Any help welcome.CheersPeter Link to comment Share on other sites More sharing options...
96RAF Posted March 3, 2016 Share Posted March 3, 2016 There is a sample trackplan in RM that shows you, when you open it in Design Mode the settings and interaction between the various 'ends'. If you just want to see it working load it as your default plan and try it. Link to comment Share on other sites More sharing options...
St1ngr4y Posted March 3, 2016 Share Posted March 3, 2016 This has also been discussed in this thread:- https://www.hornby.com/uk-en/forum/double-slips-and-graphic-circles/ Ray Link to comment Share on other sites More sharing options...
pete007 Posted March 5, 2016 Author Share Posted March 5, 2016 Hi Guys,Thank you for your replys, I have had a go with the one in the track plans and I have got it to work 😀. But now I have another problem I need to flip the crossing round, on the plan if going from top left to top right, on my layout as I look at it, it needs to be bottom left to bottom right. I have tried renumbering the point motors, reversing in point set up and I am now stuck as how to do it. Any ideas welcome.CheersPeter Link to comment Share on other sites More sharing options...
96RAF Posted March 6, 2016 Share Posted March 6, 2016 As HRMS set up the original DS then I would ask them how to rig the flipped version. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.