Mark_Hassall Posted November 17, 2017 Share Posted November 17, 2017 Hi,ive seen plenty of plans for self build versions of the Lenz BM1 ABC braking module, but I was wondering if anyone has anything similar for the BM2 with slow approach mode?ThanksMark Link to comment Share on other sites More sharing options...
2e0dtoeric Posted November 17, 2017 Share Posted November 17, 2017 http://www.dccsupplies.com/item-p-100049/lenz-bm1-automatic-braking-module-22600is the only one I can find, with a quick look. as they are less than £9 each, why struggle to make your own? Link to comment Share on other sites More sharing options...
96RAF Posted November 17, 2017 Share Posted November 17, 2017 http://www.dccsupplies.com/item-p-100049/lenz-bm1-automatic-braking-module-22600is the only one I can find, with a quick look. as they are less than £9 each, why struggle to make your own?Mine cost me pennies... I have a schematic for a BM2 but the design is not mine so even if I share it the thing is whole lot more complex than 5-diodes and involves PIC chips, hence some associated programming so you are not much further forward unless you can take the design forward.. /media/tinymce_upload/9ce080b6e3c6161f2581bd67e969f222.jpgRob. Link to comment Share on other sites More sharing options...
96RAF Posted November 17, 2017 Share Posted November 17, 2017 Further to the above here is the man demonstrating it in action... Rob Link to comment Share on other sites More sharing options...
Bulver Posted November 17, 2017 Share Posted November 17, 2017 That video is amazing, RAF, I have a soft spot for HD 3-rail, and seeing it being dcc controlled as shown on the video was a real eye-opener. Thanks for the linkRod Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.