BadgerV8 Posted January 15, 2018 Share Posted January 15, 2018 Hi folks. My laptop with Railmaster sits on a purpose-built control bench, immediately next to the laptop screen and at the same angle is my track diagram with all the points controls and other controlling bits and bobs for lights, switching a certain piece of track between DC, DCC and Programming, etc etc.What I would really like, is to eliminate the track plan diagram on the laptop screen completely and just display the loco controls. I currently have them selected to "two wide", but would prefer "four wide". Has anyone came up with a way to do this, or am I stuck with what I've got? Link to comment Share on other sites More sharing options...
Fishmanoz Posted January 15, 2018 Share Posted January 15, 2018 Hi Badger, there is no way to do this currently. You could ask HRMS or at least put an entry in the Desirable New Features thread. Link to comment Share on other sites More sharing options...
RDS Posted January 15, 2018 Share Posted January 15, 2018 https://www.hornby.com/uk-en/forum/desirable-features-for-future-railmaster-software-updates/ This is a link to the thread mentioned by Fishy Link to comment Share on other sites More sharing options...
96RAF Posted January 16, 2018 Share Posted January 16, 2018 My only suggestion is if you could turn the laptop 90 degrees so the screen is in portrait rather than landscape you would still only have two across but maybe more visible down.Not really an option for a laptop unless its one of those fancy foldback or removable screen jobs.Rob Link to comment Share on other sites More sharing options...
RDS Posted January 16, 2018 Share Posted January 16, 2018 I use a laptop for RM but with a separate screen, so that option would be easy to turn through 90 degrees. Link to comment Share on other sites More sharing options...
BadgerV8 Posted January 18, 2018 Author Share Posted January 18, 2018 Thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.