murray_robin Posted August 8, 2019 Share Posted August 8, 2019 I have difficulty stopping engines on the turntablePlease advise.chuff chuff Link to comment Share on other sites More sharing options...
Chrissaf Posted August 8, 2019 Share Posted August 8, 2019 Can you be more specific please..Do you mean stopping the loco itself on the TT bridge track, so that it doesn't overhang the end?ORDo you mean stopping the TT bridge itself at the correct location when a loco is on it being turned? Link to comment Share on other sites More sharing options...
96RAF Posted August 9, 2019 Share Posted August 9, 2019 If its trouble stopping the loco on the bridge - have you got your decel rate set high i.e. for prototypical heavy train slow stopping, if so then adjust CV4 to a lower value say 5 for light engine work or if your decoder supports it select Shunt mode (which is different from the shunt speed button in RM). Link to comment Share on other sites More sharing options...
murray_robin Posted August 9, 2019 Author Share Posted August 9, 2019 Stopping the engine on the turntable bridge so that ir doesnt over hang the end. Link to comment Share on other sites More sharing options...
96RAF Posted August 10, 2019 Share Posted August 10, 2019 As suggested then.. Link to comment Share on other sites More sharing options...
walkingthedog Posted August 10, 2019 Share Posted August 10, 2019 Surely stopping a loco on a turntable is exactly the same as stopping it anywhere. Nice and slow then stop. Link to comment Share on other sites More sharing options...
murray_robin Posted February 17, 2020 Author Share Posted February 17, 2020 If its trouble stopping the loco on the bridge - have you got your decel rate set high i.e. for prototypical heavy train slow stopping, if so then adjust CV4 to a lower value say 5 for light engine work or if your decoder supports it select Shunt mode (which is different from the shunt speed button in RM).much better,Thank yoiu Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now