Chrissaf Posted January 27, 2020 Share Posted January 27, 2020 Yes and they will retain the same addresses as previous until you change them. Link to comment Share on other sites More sharing options...
jane1707819582 Posted January 27, 2020 Share Posted January 27, 2020 Doubtful the mixed freight set are 4 pin decoders your Scotsman will probably be an eight pin .you will need to modify the socket/ plug arrangement . Link to comment Share on other sites More sharing options...
Chrissaf Posted January 27, 2020 Share Posted January 27, 2020 I have a mixed frieght digital set. Can I remove the dcc units from the trains and fit them to dcc ready flying Scotsman and tornado trains? Thanks Link to comment Share on other sites More sharing options...
Chrissaf Posted January 27, 2020 Share Posted January 27, 2020 It won't break the bank, just to buy the proper 8 pin decoders and have done with it. Then at least you can still run the others as well. Link to comment Share on other sites More sharing options...
96RAF Posted January 27, 2020 Share Posted January 27, 2020 OOPs RewindYes you can but you will have to modify the sockets as pointed out above. Link to comment Share on other sites More sharing options...
Tay00 Posted January 28, 2020 Share Posted January 28, 2020 Thanks for the advice Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now