Rocket Ron. Posted March 27, 2020 Share Posted March 27, 2020 /media/tinymce_upload/b4130a3fd767612733194382265ebc8f.jpgCheers. Link to comment Share on other sites More sharing options...
T2B Posted March 27, 2020 Share Posted March 27, 2020 Looks a very good clean build Ron. And although as with most new tools where the parts count is higher, so long as you follow the instructions there should be few pitfalls. And I have 2 Lancs in my stash that I really must get round to doing! Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted March 27, 2020 Share Posted March 27, 2020 Nice build, Rocket Ron. You built and painted that very well. Well done! 😉 😀 GNR-Gordon-4 (AF) Link to comment Share on other sites More sharing options...
Ratch Posted March 27, 2020 Author Share Posted March 27, 2020 This kit was a gift from my wife when I got back into modelling 2 years ago. I was reluctant to start it because I though it was too complex for me at the moment. It was however an easy kit to build and went together well. Care must be taken when pushing the wing spars through the fuselage but that's about the most difficult part. I decided to build it 'wheels up and the only bad fit on the kit is the closed undercarriage doors,a minor niggle. Primed with Ultimate grey primer an top coated with Tamiya acrylics . Finished off with Humbrol gloss varnish for the clean look./media/tinymce_upload/3244d4745bdbd90f351c8bd9aea3f626.jpg/media/tinymce_upload/6f767ecc6d771fd918e55cce41df294a.jpg/media/tinymce_upload/82137ff4975f84de16cf0d14249c590f.jpg/media/tinymce_upload/940ccfa4c2a0657b5843c28561e27d20.jpg/media/tinymce_upload/96ce173188e51796b8100370fb4e129f.jpg Link to comment Share on other sites More sharing options...
Ratch Posted March 27, 2020 Author Share Posted March 27, 2020 I have moved your post to the Aircraft forum. Link to comment Share on other sites More sharing options...
Rocket Ron. Posted March 29, 2020 Share Posted March 29, 2020 Cheers. Link to comment Share on other sites More sharing options...
Dark Earth Posted April 2, 2020 Share Posted April 2, 2020 Impressive job Ron ! Alot of work and a lot of paint go into a kit that big ! Quality work there !Chris Link to comment Share on other sites More sharing options...
Rocket Ron. Posted April 2, 2020 Share Posted April 2, 2020 Thanks Chris,a lot of work but very enjoyable. All the best . Ron. Link to comment Share on other sites More sharing options...
.thumb.jpg.be5580842a11593b051319c249d760ad.jpg)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now