Kevin Hodges Posted August 11, 2021 Share Posted August 11, 2021 Hi all,I have 2 x 6x4ft boards that I plan to place to each other to form an L shape, making them 10ft on the longest run, 6ft the shorter end of the L shape if I'm making sense.Can anyone suggest some layout ideas for such a setup please ?I'm hopeless working out track layouts.CheersKev. Link to comment Share on other sites More sharing options...
Andy P. Posted August 12, 2021 Share Posted August 12, 2021 Get Ultimate Racer. You can then design the table and try various things out.General tips are:try to get the longest possible straight in the layout Many don't like R1 curves but they are sometimes unavoidable. I personally find the 22.5° R1 a nice compromise. Link to comment Share on other sites More sharing options...
Kevin Hodges Posted August 12, 2021 Author Share Posted August 12, 2021 Thanks Andy, I'll give Ultimate Racer another go.I find it hard to setup the initial layout and dimensions.Kev. Link to comment Share on other sites More sharing options...
Andy P. Posted August 13, 2021 Share Posted August 13, 2021 It isn't massively intuitive but the documentation is fairly good.When I do events I measure the space / table available, shrink it by 10 cm (~5 inches) in all dimensions to account for things not fitting properly and plan in ultimate racer.If I then have time I use masking tape on the floor and actually build the layout to be sure it all fits. Otherwise I take lots of 78 and 87 mm pieces with my and other curve radii.To date I have been able to make things fit. :-) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now