Edward-1202080 Posted May 24, 2022 Share Posted May 24, 2022 Being a newbie at over 70 will the Rocket be able to convert to dcc . Thanks Andy Link to comment Share on other sites More sharing options...
96RAF Posted May 24, 2022 Share Posted May 24, 2022 If you are talking about the recently released Rocket then it already has a socket for a decoder, so conversion is simply swapping the blanking plug for a decoder. Link to comment Share on other sites More sharing options...
MartKS1707822133 Posted May 26, 2022 Share Posted May 26, 2022 Yes if its the old tri-ang rocket the only thing is if its got a smoke gen. You will need to remove it from operation as this will cause problems. The other thing as the loco run on steel track it will run on nic/silver track so you will loose the magnet affect to hold it down to the track. Link to comment Share on other sites More sharing options...
ColinB Posted May 26, 2022 Share Posted May 26, 2022 If it has a smoke generator no need to disconnect it just use a decoder with a decent output. The Zimo decoders have enough current capability and they came in really small sizes. Link to comment Share on other sites More sharing options...
RDS Posted May 29, 2022 Share Posted May 29, 2022 @EdwardModerator Note:It is in your own interest to have a unique user name. Could you please select ‘My Account’ towards the top right hand corner of your screen, then Community and choose a nickname in the ‘My Profile' tab, rather than your First name that has been automatically allocated by the system. We had hoped a Forum change was coming to prevent this automatic allocation but a manual change is required at the moment and there will be more than one member with your name. This request together with some other information for new posters is contained in a thread at the top of the General Discussion section called ‘Information for new members registering for the Forum’ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now