Lancastrian Posted January 19, 2013 Share Posted January 19, 2013 Hi I am about to set up a layout for my live steam 'Scotsman'. I notice in the LS Operator's Manual there is an oval of track with given measurements. Now here is what some of you may believe is a daft question, but to me the only daft question is the one that you don't ask. Is there a technical reason for this 'length' of track and if so, if I was to use the same length of track but with a more rectangular layout rather than the suggested oval would that be suitable without any problems. I am sure that the answer is yes it is will be alright, but I just want to be absolutely sure before I start. Many Thanks Link to comment Share on other sites More sharing options...
poliss Posted January 19, 2013 Share Posted January 19, 2013 Yes it is will be alright. The measurements will only be a suggested layout, the same as you get a serving suggestion on packets of frozen food. Link to comment Share on other sites More sharing options...
walkingthedog Posted January 19, 2013 Share Posted January 19, 2013 The track can be as long as you wish. The longer it is the more power feeds you will need but that goes with any type of model railway. Link to comment Share on other sites More sharing options...
Lancastrian Posted January 19, 2013 Author Share Posted January 19, 2013 Thanks to both of you for your helpful responses, they are very much appreciated. Link to comment Share on other sites More sharing options...
doublecee Posted January 20, 2013 Share Posted January 20, 2013 Head on over to my blog and you will see that track length isnt an issue. BUT, if you want to go for a larger layout, you need to make sure you have VERY good connections to the track. A Power Bus is recommended (each section of track then draws power from the bus, ensuring a consistent supply). craigsgardenrailway.blogspot.com Link to comment Share on other sites More sharing options...
brando Posted March 2, 2013 Share Posted March 2, 2013 Although it comes with third radius track you should use forth radius curves as live steam engines like wider curves. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.