katrich65 Posted February 16, 2013 Share Posted February 16, 2013 Hi Guys I am new to model railways and this is first post,so here goes. I have a sapphire decoder installed in my Bachmann Windhoff fitted with directional lighting.After approx 20 seconds of inactivity the lights turn off,is this normal or can the time out be altered using a cv. ( I am using an NEC PowerCab with a dedicated head light button. Thanks for your help. Link to comment Share on other sites More sharing options...
jane1707819582 Posted February 7, 2018 Share Posted February 7, 2018 set cv 111 to 0 Link to comment Share on other sites More sharing options...
RDS Posted February 8, 2018 Share Posted February 8, 2018 Just over 1 week short of 5 years to get an answer.(Well done jane2) - I wonder if katrich65 is still waiting? Link to comment Share on other sites More sharing options...
Chrissaf Posted February 8, 2018 Share Posted February 8, 2018 Mind you, that said. It was still a useful answer, I was unaware of CV111 until this post highlighted it. Link to comment Share on other sites More sharing options...
96RAF Posted February 9, 2018 Share Posted February 9, 2018 CV111 is the decoder listening time out. I.e. if not heard anything by now then kick it into touch.Rob Link to comment Share on other sites More sharing options...
Fishmanoz Posted February 9, 2018 Share Posted February 9, 2018 Then I’m assuming setting CV111 to 0 sets listening time to just a week short of 5 years? PS. Latrich may have been listening all that time but certainly not posting. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.