mcrook62 Posted December 1, 2014 Share Posted December 1, 2014 Hi AllQuick question which end is pin 1 on the 8pin block for the decoder to go into is itthe boiler door end or the cab end?regardsmcrook62 Link to comment Share on other sites More sharing options...
poliss Posted December 1, 2014 Share Posted December 1, 2014 Should be a figure '1' on the socket. It's shown at the smokebox door end in this photo.http://www.modelrailforum.com/reviews/Hornby-R2343/DSCF6932-800.jpg Link to comment Share on other sites More sharing options...
2e0dtoeric Posted December 1, 2014 Share Posted December 1, 2014 It is usually, but not always, at the forward end. Sometimes marked with a paint dot, as well. Link to comment Share on other sites More sharing options...
pidder Posted December 2, 2014 Share Posted December 2, 2014 I would expect the motor to work whichever way the decoder is fitted. If the model has lights or other functions, if they don't work just reverse the decoder fitting. Simples... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.