jonathan_hamilton Posted January 31, 2015 Share Posted January 31, 2015 Can anyone advise how to use the decoder tester with railmaster and e-link, please. An idiot's guide would help!! Link to comment Share on other sites More sharing options...
96RAF Posted January 31, 2015 Share Posted January 31, 2015 Ask HCC - they use them. Link to comment Share on other sites More sharing options...
RDS Posted January 31, 2015 Share Posted January 31, 2015 I have one. I just switch everything off, then remove the wire from the connector on my track and connect it to the tester instead. Then, insert the decoder to be tested in the ESU device, switch everything back on and call the decoder up from my controller as if it were a Loco. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.