Glenn-352951

Changed screen view for phone to standard from zoomed. This brought the green tick button just enough in to view to click successfully.

Relinking 2nd device had to enter reset code. Back to power cycle screen and same problem.

Thanks. I have just deleted the app and reinstalled it. I now have to re-link devices, but I am out of that screen. I re-linked the loco I have been trying to install a profile to, it already has the King Class installed. It's running with sound ok.

King Class

Portrait. Rotating doesn't help, app never rotates for me.

Portrait. Rotating doesn't help, app never rotates for me.

In the middle of installing a profile. When I get to the remove loco from track to power cycle, the green tick is now off screen. If I drag screen up it won't stay so that I can click on the green tick. Tried clicking quickly no good. I shut the phone down and restarted, but still in power cycle. So, stuck on this screen. I have an iphone 7.

What profile have you installed? Can you screen shot it. (Recharge your phone, 5% :)) Something to watch out for with this 4154 Prairie is that the 8 pin socket is over the drive worm. It has a hole for lubrication which unfortunately allows it to spray onto the socket board.

Cool!

I'm unsure whether a stay-alive will prevent loss of bluetooth connection. In the split second of power loss, it would keep the loco running for a few seconds, but loss of bluetooth connection would happen and reconnection with the bluetooth will take much longer.

Having trouble with bluetooth dropping out. Some locos are ok, some are more sensitive, especially at low speed. All my locos are new as I have just returned to the hobby. I am waiting for a power bank to arrive which I will fit to a Dapol class 22, to see if that improves the problem on that one. I also have a number of locos that the HM7000 decoders will not fit into, so I am also considering that a DCC controller will increase the range of decoders I can use. Also, I have an Accurascale Manor (bluetooth offender) which has a pre-installed stay alive. It is not recommended to use a HM7000 decoder with non HM7000 stay alive. So, a few issues which have me wondering about adopting DCC control.

Thanks for your replies. I am using the app on my iphone7 at the moment. But I am thinking of using a DCC controller as I am thinking it might be better than bluetooth.

I am looking to able to run HM7000 decoders in DCC rather than bluetooth. Can digitrax run hm7000 ok?

Nope, it's a Next18. And it can be fitted.

Good to know it's not just me with this same problem. Let us know if you find a solution.