Jump to content

1/43 Land Rover Pick-up Build Review


Ratch

Recommended Posts

The runners were rinsed under soapy water and left to air-dry. I took the assembly process as far as possible before I felt I needed to address the interior painting.

53180431184_bd5c44a7a2_z.jpg

53179651342_601b95d323_z.jpg

53180431149_e0b1a5aa67_z.jpg

The pot-let of 196 provided is very translucent on first brushing. 

53180739388_2b14889b7f_z.jpg

I can see multiple coats being applied before an even, flat colour is achieved (if it can be).

Link to comment
Share on other sites

Assembly continued. 

53189494254_d31149e0cd_z.jpg

To me, a glaring omission is an exhaust pipe. Did they not have one?

53189789818_29e93f1cfe_z.jpg

I ignored the painting call outs at these stages and will return to them before fitting the wheels. 

53189494239_69ac1400ac_z.jpg

I am reluctant to use 196 for the main bodywork for two reasons. Firstly, the poor coverage experienced on the interior, and secondly, Land Rovers are green, so that’s the colour I shall use.

53189789798_8d48a5cc77_z.jpg

Link to comment
Share on other sites

A little more paintwork, just touch-ups basically, and then the decals were applied. Airfix Researcher Luke Slanley-Hewitt has confirmed that the omission of the exhaust was a conscious decision, it was felt that it would be too fragile and awkward for a beginner to use on the build. By that we can clearly see who the target market is for these kits.

53198644197_9067219ced_c.jpg

In conclusion I can say that this was a stress-free build. The omission of the exhaust pipe was a little concerning, but I think the reason why it wasn’t included is valid for the target market. More experienced modellers will bemoan its omission but have the skills to scratch the pieces. Thanks to Airfix for supplying this kit for review. It deserves to do well.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
  • Create New...