Old Bob Posted February 4, 2020 Share Posted February 4, 2020 Put my R3382TTS merchant navy class on the peco railer to give a run On the track all fine Did this again but this time it would not go on the track .Then put directally on the track .NO sound no movement Noticed 2 metal prongs protruding on the front bogie Unfortunte out of warranty Any advice please /media/tinymce_upload/d67ed37e24aae8e0fadc8e9eec8b4827.JPG Link to comment Share on other sites More sharing options...
walkingthedog Posted February 5, 2020 Share Posted February 5, 2020 Prongs are part of the bogie, most if not all steam locos have them for clearing rubbish off the rails. Link to comment Share on other sites More sharing options...
Rog RJ Posted February 5, 2020 Share Posted February 5, 2020 They are called "Guard Irons" Link to comment Share on other sites More sharing options...
walkingthedog Posted February 5, 2020 Share Posted February 5, 2020 Thanks Rog couldn't remember. Link to comment Share on other sites More sharing options...
96RAF Posted February 5, 2020 Share Posted February 5, 2020 Have you tried to see if it will react to address three as simply putting it on track may have reset the decoder. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now