Dav2 Posted April 3, 2020 Share Posted April 3, 2020 Not a major problem as such, just wondering if there are any mods people do to the straight line lane change track to improve performance. Not on the actual lane changing ability, the ability to deliver the power.At present on slow speed the cars always do a slight stutter going over the lane change track, given the layout of the track it is kinda expected. However when calibrating cars for slow speed laps at end of rces for example, they can sometimes get stuck going over these. I know you can just up the speed but still. Do people carry out any small mods/improvements to improve connection to the cars across the track? Link to comment Share on other sites More sharing options...
gorp Posted April 4, 2020 Share Posted April 4, 2020 Changer mods can be found at slot forum digital scaly but may depend on scaly digital powerbase you are using and if it requires simple solder mod too. Link to comment Share on other sites More sharing options...
Dav2 Posted April 4, 2020 Author Share Posted April 4, 2020 Ah yes found my answer, thank you. It appears, as I thought, this is a well known problem with people trying various fixes. The so called flipper dead spot.The fix supplies power to the flipper. Not sure if I'm allowed to post the link or not... Link to comment Share on other sites More sharing options...
gorp Posted April 4, 2020 Share Posted April 4, 2020 It is easy to find on slot forum.Personally never needed it, because drive fast enough to get through. Link to comment Share on other sites More sharing options...
Dav2 Posted April 4, 2020 Author Share Posted April 4, 2020 Agreed, although I'm very new and slow it's no problem when racing. But I don't like how the lights can flicker or the stutter made by the cars, say when going slow under yellow flag etc. It's not a biggy, so may not do the fix and I'll learn to ignore it. Link to comment Share on other sites More sharing options...
gorp Posted April 4, 2020 Share Posted April 4, 2020 Hey think of the light flicker as a hazard light on a car telling you do not stop here. Link to comment Share on other sites More sharing options...
alex_falzon Posted June 12, 2020 Share Posted June 12, 2020 Hay anyone any ideas on removing flippers on the changer c7036 Link to comment Share on other sites More sharing options...
alex_falzon Posted June 12, 2020 Share Posted June 12, 2020 Also how to restore c7036 after 2 years storage Link to comment Share on other sites More sharing options...
gorp Posted June 13, 2020 Share Posted June 13, 2020 If it was working when stored, should work when used again. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now