Thanks to everyone who has responded. First of all, I can confirm that the loco runs fine with the HM7000 decoder in. All sounds work in accordance with the profile, which is the profile for Class 66 (as there is not yet one for class 59). I have been trying various combinations of the functions (F0 and F21-24). I can get different lighting effects working with various combinations, although can only get the cab light on work at one end via F23. My problem is that F0 is not providing directional lights. F0 is currently giving red lights at No.1 end when going forward with no lights at No.2 end, when reversing no lights at No.1 end, but headlights on No.2 end. I am thinking this is because Dapol seem to use 2 separate functions (one for each end of the model). F0 for one end, and F1 for the other. I would like them to work conventionally (directional white/red) on F0, but I don’t mind them being split to 2 functions as long as I can get them to work in sync with the direction. Of course F1 on the HM7000 decoder is for the sound on/off so I can’t use that, and having waded through the 130 page manual, all I can ascertain is that the decoders don’t allow remapping, although it is possible to change CV’s. So, I am open to any suggestions how I can get basic directional lights (aligned with direction), on F0, with cab lights on a separate function. Please 😊