HM6000 PWM settings.

[Roger1707821911]

Just watched an online review of the HM600 which showed in the Edit Devices menu (IIRC) the ability to alter the frequency of the PWM. The demonstrator was using an iphone... I cannot find this on my Android ... is it only available on the iphone?

Roger Chalford

[Foden 4400]

I found it in Device Settings Edit Devices HM6000-1100 Scroll Down to Circuit 1

The different PWM settings make quite a difference to the control of the loco.

Tim Walley

[96RAF]

Each circuit can be so adjusted individually via Edit Devices in Settings.

Also covered in the full user manual.

Be aware that if running a decoder fitted loco using this system, you may got odd responses if you fiddle with the PWM Freq setting.

DC locos are fine and generally respond per the video review.

I haven’t tried it with a core-less motor yet as I don’t have one.

[Roger1707821911]

@ TI..

Are you using an android device....

The option certainly doesn't exist on mine.

Roger

[Foden 4400]

Hi Roger,

Sorry No an apple device.

Must be a glitch in the app, for android - good job you flagged it up.

Tim

[Roger1707821911]

Thanks Tim

That's 2 glitches so far....

Roger

[96RAF]

Added to the bug report list.

What was the first glitch?

[Roger1707821911]

@96RAF

First issue was 2.2 second interval breaks in the sound

Roger (Chalford)

[96RAF]

First issue was 2.2 second interval breaks in the sound.

Thanks Roger.

That issue is under investigate but at day’s end may not be fixable in the HM|DC app as I am told that latency is a well known android audio fault likely requiring an update to each android device firmware.