KnightOwl Posted February 24, 2022 Share Posted February 24, 2022 Any advice on reducing throttle sensitivity on VW Bugs, Camper and Panel vans? I have a few of each fitted with chips and the lightest trigger squeeze and they are flat out! All my other cars behave with a smooth acceleration but these vehicles are so hard to control. I'm using arc pro with just 1 power supply at the moment. In digital mode, it's bad, but if I race them on the digital power supply in analogue mode it's impossible to control them. I'm thinking of weighting them down more as the are a tough drive cornering but initially I would like to desensitise them on throttle response. Thanks in Advance 😀 Link to comment Share on other sites More sharing options...
Andy P. Posted February 25, 2022 Share Posted February 25, 2022 It's a known problem with the latest digital chips. The older digital chips behaved a little better.The best thing is to remove the chips for analog mode.In digital mode they should behave normally though.Maybe there is an old profile still active in the app?You can of course use the app to control all aspects... Link to comment Share on other sites More sharing options...
KnightOwl Posted February 25, 2022 Author Share Posted February 25, 2022 It's a known problem with the latest digital chips. The older digital chips behaved a little better.The best thing is to remove the chips for analog mode.In digital mode they should behave normally though.Maybe there is an old profile still active in the app?You can of course use the app to control all aspects... Link to comment Share on other sites More sharing options...
KnightOwl Posted February 25, 2022 Author Share Posted February 25, 2022 Thanks Andy. Will swap over too any older rev chips I may have and see how it goes and look to the app to tame them :) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now