Shackz Posted December 28, 2021 Share Posted December 28, 2021 Hi. A quick question, can you apply humbrol clear satin over Humbrol clear gloss without causing an issue? I’ve done the clear gloss for decals and enamel panel lining but want a satin finish overall. Many thanks in advance. Link to comment Share on other sites More sharing options...
Ratch Posted December 28, 2021 Share Posted December 28, 2021 Should not be a problem. I always apply a gloss coat prior to decals then the appropriate gloss, matt or satin finish after. Link to comment Share on other sites More sharing options...
Shackz Posted December 28, 2021 Author Share Posted December 28, 2021 Perfect, thank you Ratch. Link to comment Share on other sites More sharing options...
Kenneth ONeill Posted December 28, 2021 Share Posted December 28, 2021 Shackz - I see no problem either, as long as the clear coat is fully dry. Link to comment Share on other sites More sharing options...
Shackz Posted December 28, 2021 Author Share Posted December 28, 2021 Thanks Kenneth Link to comment Share on other sites More sharing options...
paul71 Posted December 29, 2021 Share Posted December 29, 2021 all coated in gloss then decals put on, once decals have dried a coat of gloss over decals to seal them in.spitfire left as gloss as these were metal.hurricane after gloss then had a coat of clear matt all over once the gloss has fully dried, as these were fabric coveredthunderbolt gloss with the olive drab stripe having a coat of clear matt to dull it down a bit Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now