Steve-353799 Posted April 22, 2023 Share Posted April 22, 2023 Being a newbie can anyone reccomend a suitablepower source for the track so it's always powered which can be used with the HM DCC app to operate HM7000 Bluetooth decoders.Thanks,Steve Link to comment Share on other sites More sharing options...
Moccasin Posted April 22, 2023 Share Posted April 22, 2023 There’s a pinned thread above this one that tells you what you need to know. Link to comment Share on other sites More sharing options...
LTSR_NSE Posted April 22, 2023 Share Posted April 22, 2023 Link to thread Moccasin referred to:https://uk.hornby.com/community/forum/important-approved-power-sources-for-use-with-the-hm-dcc-app-and-hm-7000-decoders-352261?ccm_paging_p=2#end-of-repliesThe power options recommended by Hornby are:• P9100W 1amp PSU & R7324 HM7020 adapter cable (for approx 3 locos)or• R7337 4amp PSU & adapter cable bundle (for approx 10 locos)If you use Hornby points (which are isolating) you will also need point clips (or additional power links/feeds) to ensure your whole layout is permanently electrically connected. Link to comment Share on other sites More sharing options...
Fishmanoz Posted April 23, 2023 Share Posted April 23, 2023 Might I suggest you read the other pinned posts too. There’s lots of useful information there. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now