If you can be 101% certain that the two systems will never electrically connect together then go ahead. But if they connect, could be a locomotive or coach derailing, then the Magic Smoke will be let out. Derekr.
I can confirm that the HM6010 with the latest firmware can be programmed with a DCC system. My PowerCab did a poor job but my Sprog worked perfectly. Well done Hornby. Derekr
The MXULFA sets CV144 when it first reads a decoder, could this cause problems as CV144 in the HM7000 decoder is "source of motor control" setting. Derekr
HM6010 firmware v1.10.0 still goes to sleep after one minute, but now i find this problem happens in all firmware versions back to 1.7.1 Do I take it it is a "feature"? Derekr.
Updated to 1.10.0 still goes to slep after one minute. I went back to 1.7.1 it shuts off after one minute, this happened after updating to 1.8.2. This problem make my HM6010 un-useable so I have had to resort to probe and stud to keep my shunting plank working. Derekr.
Bug? The HM6010 with firmware v1.8.2 switches itself off after 59 seconds, if you then goto the home screen and press resume everything comes back on for a further 59 seconds. Derekr
Thank you for title change. Feature or bug? The HM6010 with firmware v1.8.2 switches itself off after 59 seconds, if you then goto the home screen and press resume everything comes back on for a further 59 seconds. iPhone 6 IOS 15.7.3 Derekr