Jump to content

derekr1707821591

Members
 View Profile  See their activity

  • Posts

    35

  • Joined

  • Last visited

 Content Type 

Everything posted by derekr1707821591

  1. derekr1707821591
    Couldn't miss that at that price. Thank you for the heads up. The last one I bought from them had a Railmaster CD included for the same price. Derekr
  2. derekr1707821591
    If you can be 101% certain that the two systems will never electrically connect together then go ahead. But if they connect, could be a locomotive or coach derailing, then the Magic Smoke will be let out. Derekr.
  3. derekr1707821591
    For 3mm Banana Plugs, try WWW.Handem.uk Derekr.
  4. derekr1707821591
    I have been playing with the HM6010 on DCC and so far everything works as per the R8247 manual. Derekr.
  5. derekr1707821591
    I can confirm that the HM6010 with the latest firmware can be programmed with a DCC system. My PowerCab did a poor job but my Sprog worked perfectly. Well done Hornby. Derekr
  6. derekr1707821591
    In that case it's time to play. Is there a prize for the first person (idiot) to brick a HM6010? Derekr.
  7. derekr1707821591
    Does that mean it can be programmed as well? Derekr.
  8. derekr1707821591
    The MXULFA sets CV144 when it first reads a decoder, could this cause problems as CV144 in the HM7000 decoder is "source of motor control" setting. Derekr
  9. derekr1707821591
    Thank you Rob, all now working again v1.6.3 solved it. Derekr.
  10. derekr1707821591
    HM6010 firmware v1.10.0 still goes to sleep after one minute, but now i find this problem happens in all firmware versions back to 1.7.1 Do I take it it is a "feature"? Derekr.
  11. derekr1707821591
    Updated to 1.10.0 still goes to slep after one minute. I went back to 1.7.1 it shuts off after one minute, this happened after updating to 1.8.2. This problem make my HM6010 un-useable so I have had to resort to probe and stud to keep my shunting plank working. Derekr.
  12. derekr1707821591
    Thank you. Derekr.
  13. derekr1707821591
    Bug? The HM6010 with firmware v1.8.2 switches itself off after 59 seconds, if you then goto the home screen and press resume everything comes back on for a further 59 seconds. Derekr
  14. derekr1707821591
    Thank you for title change. Feature or bug? The HM6010 with firmware v1.8.2 switches itself off after 59 seconds, if you then goto the home screen and press resume everything comes back on for a further 59 seconds. iPhone 6 IOS 15.7.3 Derekr
  15. derekr1707821591
    My appologies Rob it is v1.8.2. Fat fingers. Derekr Mod note - your title amended.
  16. derekr1707821591
    Has anybody any information on this update? It installed without any problems so would be nice to know what has changed. Also updated my HM6000 to Firmware v1.11.1, took two attemps but appears to be OK. Again any information on this update? Derekr
  17. derekr1707821591
    Just to close this thread, the cable was badly crimped at both ends. The centre pair pulled out of the plug when I pulled the outer insulation off. Anyway two new plugs crimped on and all working now. Derekr.
  18. derekr1707821591
    Cable re-crimped, still only pins 2, 5 and 6 have continuity. Derekr.
  19. derekr1707821591
    Cable to be used with a R8239 Booster. If I need pins 1 and 6 to have continuity then the cable needs re-crimping. What ever happend to "Quality Control" Thanks Rob, Derekr
  20. derekr1707821591
    Hi all, Just bought a new R8236 cable and it does not work. Put on my RJ45/RJ11 Cable Tester and I only have continuity on pins 2, 5 and 6. Does this cable need continuity on all 6 pins? I guess it does but just confirming before I either re-crimp it or replace both plugs. Derekr.
  21. derekr1707821591
    Looks like Hornby have pulled the 1.7.1 update. Derekr.
  22. derekr1707821591
    You can also buy adaptors from 5.5 x 2.1mm to 6.3 x 3mm. It's a bit of a lashup but it works. Derekr.
  23. derekr1707821591
    Thank you Rob will do. The point designeted ports go to sleep as well. Derekr
  24. derekr1707821591
    iPhone 6s 15.4.1 software version app inactivity Disabled Yes ports setup correctly Using the app did not make any diference the ports still switched off after a minute. I will connect everything to my shunting plank today and check the points operation. Derekr
  25. derekr1707821591
    i do not know if this is a feature or a bug. Connect a light to one port and a signal to another port. Switch on light and signal. Wait about one minute and both will switch off. Go to the home screen and tap "Resume Operation Control" The light and signal will both resume oreration for another minute. Derekr.
×
×
  • Create New...