Ian Edgar Posted January 23, 2020 Share Posted January 23, 2020 Hi,I have the Skaledale colliery (mine) buildings but cannot work out how they should be laid out properly, I want to add the winch ropes to the main headstock building (R9628) wheels but I’m confused what they would be attached to. Should the ropes come onto the Headstock sub-station (R8774) wheels with the supposed electrical drive drums being in the building within it. Or should the ropes go into the Upper Shaft house (R8775) . Where does the Lower shaft house (R8776) and the Winding Engine house (R8777) come into this? I’m trying to think of the rope angles as there must be a good angle of rope that makes contact with the wheels.My father worked down the pits in the north east but he can’t make real sense of the buildings either.I wonder if there’s anyone who can help who understands how these buildings come together as far as the pit head rope drives etc.Thankyou Link to comment Share on other sites More sharing options...
walkingthedog Posted January 23, 2020 Share Posted January 23, 2020 Not sure if this is the right stuff but does this help?/media/tinymce_upload/744196c06468b12791a6790d841a08a2.jpg Link to comment Share on other sites More sharing options...
96RAF Posted January 23, 2020 Share Posted January 23, 2020 Fairly easy as I was brought up in a mining village with miners as my close kin. The engine house with the winding gear was remote from the headstock and main pulley wheels, which stood over the mine shaft, in order to drop the cages directly down the shaft. Usually the rope drums were interlinked so a down cage partially balanced an up cage. You can see the rope entry slots in the winding room building to the right of the structure with the red pulley wheels in WTDs picture. Google ‘coal mine head rope arrangement’ and select images and you will not only get the (wire) rope (although they were steel cables) routing but also the disposition of the various buildings. Steam was used for winding engines before electricity so there would be a boiler house and associated steam engine to drive the rope drums. The right angled blue ducting in WTDs picture is a shaft vent used to draught air out of the mines. Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted January 23, 2020 Share Posted January 23, 2020 @walkingthedog That's a lovely image, Brian. Thank you for posting it. 😉 😀 Out of interest, where did you get that image from? Google? GNR-Gordon-4 (HF) Link to comment Share on other sites More sharing options...
walkingthedog Posted January 23, 2020 Share Posted January 23, 2020 Yes Jacob, just searched for Skaledale mine layout. Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted January 23, 2020 Share Posted January 23, 2020 I understand. Thank you Brian. 😀 GNR-Gordon-4 (HF) Link to comment Share on other sites More sharing options...
walkingthedog Posted January 23, 2020 Share Posted January 23, 2020 Everything is there somewhere. 😆 Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted January 23, 2020 Share Posted January 23, 2020 There's not much that Google can't find these days! 😆 😉 😀 GNR-Gordon-4 (HF) Link to comment Share on other sites More sharing options...
Ian Edgar Posted January 24, 2020 Author Share Posted January 24, 2020 Hi,thank you, the mine image does correlate in pairing the Winding Engine house with the Headstock sub-station as shown in the Skaledale image.So looking to the left of the image you have the Upper Shaft House being the last building and I think the Mining Headstock 2 structure would be further left and have it’s wire ropes between the two. Don’t know why it’s not in the image as all the other buildings are.Would it therefore be correct that the drive is via the Headstock Sub-Station (electric motor drive) with two cage chambers counter-acting each other up & down underneath both wheel structures. The Upper Shaft House would be the wheel house for brake etc. My Father says you could see the driver/brake man in the wheelhouse as you passed into the pit head.anyway many thanks for your replies, just want it to look right as You all know. Link to comment Share on other sites More sharing options...
96RAF Posted January 24, 2020 Share Posted January 24, 2020 Usually the counterbalance arrangement ws used to ease work load on the winding engine.Typical model mine layout.../media/tinymce_upload/3942c069dce291303e2682038790aea6.png Link to comment Share on other sites More sharing options...
96RAF Posted January 24, 2020 Share Posted January 24, 2020 See here Notice how the big wheels turn in different directions indicating one cage travelling down shaft and the other upshaft. Link to comment Share on other sites More sharing options...
Andrew-362505 Posted July 25, 2023 Share Posted July 25, 2023 Hi IanDid you end up building your mine and if so can you post a picture(s) I'm just going through the same thing. Googling etc. I'm going to take a run out to my fairly local Scottish Mining Museum with pictures of the Skaledale buildings. But perhaps you've already achieved the look I'm after.Regards, Andy Link to comment Share on other sites More sharing options...
Brew Man Posted July 25, 2023 Share Posted July 25, 2023 This thread is three and a half years old and considering Ian Edgar only posted three times in total, it is extremely unlikely that he will read, let alone answer your post. Link to comment Share on other sites More sharing options...
Rana Temporia Posted July 25, 2023 Share Posted July 25, 2023 Andrew, this book should answer most of your questions and is probably available on line for very little. Link to comment Share on other sites More sharing options...
81F Posted July 27, 2023 Share Posted July 27, 2023 If you google "hope pit" and switch to images you will find pictures of most if not all the actual mine buildings Hornby based their model on. Some giving a really useful insight in to how they all were arranged.Hope this helps! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now