potmill bridge Posted February 22, 2023 Share Posted February 22, 2023 In the product info it states " These clips do also have certain specific uses for analogue running.".Can anyone please explain what the specific uses are ? Link to comment Share on other sites More sharing options...
Skelton Junction Posted February 22, 2023 Share Posted February 22, 2023 Unsure if it’s the one alluded to in the quote but I’m running a DC layout (waiting on 7000) with all points clipped and all power everywhere all at once, but, I’m only running one loco. Link to comment Share on other sites More sharing options...
LTSR_NSE Posted February 22, 2023 Share Posted February 22, 2023 For example on a layout where you have several points, (e.g. a shunting yard) but only ever have 1 locomotive on the entire track, and you want power to the loco regardless of how any of the points are set. Link to comment Share on other sites More sharing options...
potmill bridge Posted February 22, 2023 Author Share Posted February 22, 2023 Thanks for the explanation All, I thought that might be the case but was not certain.Am going to be using dual gaugemaster control in a day or two running 2 trains, so the pins would not really be required, until I eventually move to DC probably next year. Link to comment Share on other sites More sharing options...
von Klinkerhoffe Posted February 22, 2023 Share Posted February 22, 2023 Potmill BridgeNot sure if you have seen this post or not, but may help:‘TT8035 DCC Track Turnout Clip Contents’link:https://uk.hornby.com/community/forum/tt8035-dcc-track-turnout-clip-contents-342723 Link to comment Share on other sites More sharing options...
potmill bridge Posted February 23, 2023 Author Share Posted February 23, 2023 Thanks von Klinkerhoffe, I had not seen that post previously so that was helpful. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now