96RAF Posted August 9, 2017 Share Posted August 9, 2017 My layout bigest loop isnt long enough to hang very many coaches on, nor have I that much stock in the first place.Sorry - non combatant for this event, but if you are serious at this hauling game then go look at some of the long trains regularly seen on NMRA facebook page where the Yanks consist H0 trains that must be scale close to prototype miles of length/rolling stock numbers and also run them up severe grades and around mega-spiral helixes.Rob Link to comment Share on other sites More sharing options...
walkingthedog Posted August 9, 2017 Share Posted August 9, 2017 Years ago on my old layout in the attic which had a circuit about 10X10 ft which gave a track length of about 40 ft, I attached all the rolling stock I could to a Wrenn Castle class loco. The coupling of the last wagon was about 1 inch away from the front of the loco, so I reckon about 39ft of coaches and wagons. No gradients. Link to comment Share on other sites More sharing options...
JJ73 Posted December 19, 2017 Author Share Posted December 19, 2017 Hiya 😆"If you go down to the woods today..." well Millers Dale Station actually then you will see a wood carving of a Steam Engine - & I've made 2 vids of it - a day version & a night version,goto my Channel (Jimyjamrs73) & goto Playlist called Monsal Trail look for 2 vids called "Wooden Carving Of A Steam Train @ Millers Dale (Day Version)" or "Wooden Carving Of A Steam Train @ Millers Dale (Night Version)"Thank you & enjoy Link to comment Share on other sites More sharing options...
JJ73 Posted July 17, 2018 Author Share Posted July 17, 2018 Hiya :)I have just Review :- Hornby - The Collector - The Review - Issue 116, Summer 2018If you want to take a look & see what you think then here is the linkI thank you :) Jimyjames Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted July 17, 2018 Share Posted July 17, 2018 Great video. 😀 What was with that intro of Smokey Joe and an open wagon running to an end of piece of track and then falling off? Was this done on purpose? I hope those models didn't get damaged. GNR-Gordon-4 Link to comment Share on other sites More sharing options...
Howbi Posted July 17, 2018 Share Posted July 17, 2018 Why isn't this in the Hornby Collector Club section?..........Fortunately I have the Collector magazine so I have no need to watch this poor quality video..........HB Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted July 17, 2018 Share Posted July 17, 2018 Why isn't this in the Hornby Collector Club section? Good point. I didn't notice that it's in the wrong section. I am sure a moderator will move it to the correct place. GNR-Gordon-4 Link to comment Share on other sites More sharing options...
37lover Posted July 17, 2018 Share Posted July 17, 2018 HB & GNR Gordon,Go back to the first page where Admin explains that he set up this thread for JimyJames to post his videos. Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted July 17, 2018 Share Posted July 17, 2018 Thanks for the reminder. I do remember this post and this topic. GNR-Gordon-4 Link to comment Share on other sites More sharing options...
JJ73 Posted July 18, 2018 Author Share Posted July 18, 2018 Great video. 😀 What was with that intro of Smokey Joe and an open wagon running to an end of piece of track and then falling off? Was this done on purpose? I hope those models didn't get damaged. GNR-Gordon-4Thank you - It's my new intro that I add to every vid that I now make - it is suppose to repersent all my different types of vids that I do - i.e. Smokey Joe repersent any train vids (either model or real life) the 3D printer repersents itself - the GoPro - the filming I do - The Drinks bottle - bike rides - the idea was suppose to be more spectactular in my head that was was suppose to happen - b/c I wanted it to look like if every thing I done on my channel exploded out of my 3D Printer as it 3D Prints!!! but i didn't work as well as I thout iot out in my Head :( & yes it was done on purpose & don't worry Smokey Joe landed on a very big soft cussion :) so that nothing would get damage!!! Link to comment Share on other sites More sharing options...
JJ73 Posted July 18, 2018 Author Share Posted July 18, 2018 Why isn't this in the Hornby Collector Club section?..........Fortunately I have the Collector magazine so I have no need to watch this poor quality video..........HBOh yes I didn't think of that - well obvererly you did watch it or other wise you wouldn't know that it was a " poor quality video" - I don't apprecaite being put down thank you very much Link to comment Share on other sites More sharing options...
RB51 Posted July 18, 2018 Share Posted July 18, 2018 This video is in the correct thread, as organised by Admin. Please can we be respectful of the efforts of others. R- Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted July 18, 2018 Share Posted July 18, 2018 @Jimyjames I see, so you trying to make dare devil stunts in your videos! 😆 GNR-Gordon-4 Link to comment Share on other sites More sharing options...
JJ73 Posted August 1, 2018 Author Share Posted August 1, 2018 Hiya :)I wanted to say when I was in Norway "hello & say I am here & your not!!!" but I couldn't b/c I couldn't remember my pass word!!! arrrrrrrrrrrrrAny whooo I not normally interested in Diesels or Electric Trains - more of a Steam Engine fan but saying that - I was really impressed with the Norwegian Electric Trains - cos on the side they have large Full Colour Photos of beautiful Landscapes on the sdides of their Loco's - Check out my YouTube Channel to see what I mean, also I'll post a few photos with this topic so you can see what I mean :)More Vids & photos to come on my Channel over the next few days...Look for Jimyjames73/media/tinymce_upload/fdb6225c1e1a54c75b2ef3451047fa24.JPG/media/tinymce_upload/c0b3a1ddd7d7e13c5c7cb51b3449b82b.JPGThis is what they used back in the day when they were 1st building the line to get from A to B Link to comment Share on other sites More sharing options...
JJ73 Posted August 1, 2018 Author Share Posted August 1, 2018 Hiya :)I wanted to say when I was in Norway "hello & say I am here & your not!!!" but I couldn't b/c I couldn't remember my pass word!!! arrrrrrrrrrrrrAny whooo I not normally interested in Diesels or Electric Trains - more of a Steam Engine fan but saying that - I was really impressed with the Norwegian Electric Trains - cos on the side they have large Full Colour Photos of beautiful Landscapes on the sdides of their Loco's - Check out my YouTube Channel to see what I mean, also this is the 2nd post about Norway - the 1st contain Photos - so have to wait for them to be processedMore Vids & photos to come on my Channel over the next few days though...Look for Jimyjames73 Link to comment Share on other sites More sharing options...
JJ73 Posted August 1, 2018 Author Share Posted August 1, 2018 Just a few more Photos just to temp you ;)2nd Photo look sidesways - sunset on Fjords/media/tinymce_upload/a1c71ee954d376eb16c756bb05629be1.JPG/media/tinymce_upload/344f80b86da236fe579a57cadd4dcdcb.JPG Link to comment Share on other sites More sharing options...
2e0dtoeric Posted August 1, 2018 Share Posted August 1, 2018 For Norwegian 'cab-rides', check out you-tube for Hinducowgirl. Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted August 1, 2018 Share Posted August 1, 2018 Great photos, Jimyjames. 😀 GNR-Gordon-4 Link to comment Share on other sites More sharing options...
JJ73 Posted August 1, 2018 Author Share Posted August 1, 2018 Great photos, Jimyjames. 😀 GNR-Gordon-4Thank you Gordon - :) Check out my Youtube channel for more of my Holiday snaps & will be adding more tomorrow Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted August 2, 2018 Share Posted August 2, 2018 You are welcome and I will check your YouTube Channel out, for that. 😀 GNR-Gordon-4 Link to comment Share on other sites More sharing options...
Kevin Hodges Posted December 7, 2018 Share Posted December 7, 2018 C'mon lads & lasses, Let's all get behind Jimyjames and support him and his channel. The guy really puts in the effort & he is a valued member of our community here at the Hornby forum. In no way does he deserve the shellacking he has copped or the lack of support. Maybe some others here with all their experience and knowledge could contribute to his videos in some way too ? Something fantastic could grow from his channel and it supports Hornby too. We should support our own. What do you say ? Kev. Link to comment Share on other sites More sharing options...
JeremiahBunyan Posted December 7, 2018 Share Posted December 7, 2018 I've subscribed, and you know what I did a quick watch of his first few videos and his latest and there's certainly improvement! Some people just talk utter rubbish! Glad I subscribed to Jimyjames73 Link to comment Share on other sites More sharing options...
mjb1961 Posted December 7, 2018 Share Posted December 7, 2018 I have to agree.,,I'm a subscriber and have watched a few of jimmys videos ,,,keep them coming Jimmy 😀 Link to comment Share on other sites More sharing options...
backontrack Posted December 7, 2018 Share Posted December 7, 2018 People should be free to make their own choices as and when they want to without others suggesting what they should be doing. If they want to watch i am sure they will do so. Link to comment Share on other sites More sharing options...
RB51 Posted December 7, 2018 Share Posted December 7, 2018 @ Kevin Your post has been removed as bad language is not permitted and backontrack is making a perfectly valid point. R- Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now