Silver Fox 17 Posted November 7, 2022 Share Posted November 7, 2022 David Watts,Dont know how you missed it but the catalogue and brochure say 640mm radius.Garry Link to comment Share on other sites More sharing options...
RDS Posted November 7, 2022 Share Posted November 7, 2022 @paulModerator Note:It is in your own interest to have a unique user name. Could you please select ‘My Account’ towards the top right hand corner of your screen, then Community and choose a nickname in the ‘My Profile' tab, rather than your First name that has been automatically allocated by the system. We had hoped a Forum change was coming to prevent this automatic allocation but a manual change is required at the moment and there will be more than one member with your name. This request together with some other information for new posters is contained in a thread at the top of the General Discussion section called ‘Information for new members registering for the Forum’ Link to comment Share on other sites More sharing options...
RDS Posted November 7, 2022 Share Posted November 7, 2022 Dont know how you missed it but the catalogue and brochure say 640mm radius.Garry Garry,Don't know how you missed it but on the 16th October, I posted requesting that you choose a nickname.wink Link to comment Share on other sites More sharing options...
96RAF Posted November 7, 2022 Share Posted November 7, 2022 I’m wondering if the locomotives will travel in the same direction as European TT or in reverse like my old Triang-TT? DC models will be wired such that if right rail is positive the loco will move forward.DCC equipped models will go the way they are commanded. Link to comment Share on other sites More sharing options...
Silver Fox 17 Posted November 7, 2022 Share Posted November 7, 2022 Dont know how you missed it but the catalogue and brochure say 640mm radius.GarryGarry,Don't know how you missed it but on the 16th October, I posted requesting that you choose a nickname.wink I cannot do what you ask on my phone, the facility to do this does not appear, I will have to see if it is on our little ones laptop. Garry Link to comment Share on other sites More sharing options...
5Dublo2 Posted November 7, 2022 Share Posted November 7, 2022 ... the catalogue and brochure say 640mm radius.Garry I am a bit puzzled about the value of 640mm for Radius 6 as if the geometry is that Radius 4 is separated from Radius 3 by 43mm (as are all the gaps down to Radius 1) Then assuming Radius 5 (if it existed) and Radius 6 have the same spacing then Radius 6 should be (Radius 4) 396mm+86mm = 482mm and not 640mm. However as the points are quoted as 631mm radius then I guess 640mm is close to that of the points Link to comment Share on other sites More sharing options...
Silver Fox 17 Posted November 7, 2022 Share Posted November 7, 2022 ... the catalogue and brochure say 640mm radius.GarryI am a bit puzzled about the value of 640mm for Radius 6 as if the geometry is that Radius 4 is separated from Radius 3 by 43mm (as are all the gaps down to Radius 1) Then assuming Radius 5 (if it existed) and Radius 6 have the same spacing then Radius 6 should be (Radius 4) 396mm+86mm = 482mm and not 640mm.However as the points are quoted as 631mm radius then I guess 640mm is close to that of the points SK told me the 6th radius curve was only for returning the point to a parallel line. Link to comment Share on other sites More sharing options...
Brew Man Posted November 7, 2022 Share Posted November 7, 2022 Dont know how you missed it but the catalogue and brochure say 640mm radius.GarryGarry,Don't know how you missed it but on the 16th October, I posted requesting that you choose a nickname.winkI cannot do what you ask on my phone, the facility to do this does not appear, I will have to see if it is on our little ones laptop.Garry @GarryI was able to change it fine on my phone. Pull down the 'My Account' menu top right and select 'Profile'. Click on the 'Community' icon at the right and scroll to the bottom. Link to comment Share on other sites More sharing options...
Silver Fox 17 Posted November 7, 2022 Share Posted November 7, 2022 wink@GarryI was able to change it fine on my phone. Pull down the 'My Account' menu top right and select 'Profile'. Click on the 'Community' icon at the right and scroll to the bottom. I don't have anything that gives "My account". I have tried all the buttons and drop down menus but it is not there. Garry Link to comment Share on other sites More sharing options...
Brew Man Posted November 7, 2022 Share Posted November 7, 2022 Which Browser are you using? I tried it with Chrome.Also, I just noticed that if I have my phone in portrait the 'My Account' link is not there, but if I turn it to Landscape, it is.EDIT: Further to this, if the 'My Account' link is not visible, you can get to the same place via the three horizontal bars, (known as hamburgers) at the top right. Link to comment Share on other sites More sharing options...
Yelrow Posted November 7, 2022 Share Posted November 7, 2022 Anybody had there Welcome/ membership pack ? i had an email this morning asking me what i thought of it. Replied saying i had not received it. Then got a further email saying that due to extensive demand, packs were 2 months in arrears. Left hand/ right hand job. Link to comment Share on other sites More sharing options...
Silver Fox 17 Posted November 7, 2022 Share Posted November 7, 2022 Which Browser are you using? I tried it with Chrome.Also, I just noticed that if I have my phone in portrait the 'My Account' link is not there, but if I turn it to Landscape, it is. Still does not show up in Landscape. I am using Chrome. Garry Link to comment Share on other sites More sharing options...
Chris98 Posted November 7, 2022 Share Posted November 7, 2022 Got the welcome pack last week and the magazine about an hour ago. I think its a case of patience due to unexpected demand. Link to comment Share on other sites More sharing options...
D9020 Nimbus Posted November 7, 2022 Share Posted November 7, 2022 I got the two emails too — the second one this morning, followed by the membership pack and the magazine coming in the post — the pack with the parcel delivery, the magazine with the letters. Link to comment Share on other sites More sharing options...
david_watts1 Posted November 7, 2022 Share Posted November 7, 2022 Dont know how you missed it but the catalogue and brochure say 640mm radius.Garry Thanks Garry, I must have had one of those moments, or too much beer. I assumed the 640mm was the length of the track. I'm an idiot when looking at it, set track over 2 feet long. Cheers. A 4'2" loop in rad 6. I can feel it coming as an extension to the track mat layout. Link to comment Share on other sites More sharing options...
Brew Man Posted November 8, 2022 Share Posted November 8, 2022 Which Browser are you using? I tried it with Chrome.Also, I just noticed that if I have my phone in portrait the 'My Account' link is not there, but if I turn it to Landscape, it is.Still does not show up in Landscape. I am using Chrome.Garry I see in your screen shot there is a link at the bottom to My Dashboard. If you click on that you should be able to click on 'Community' on the right. At the bottom of that page you can change your nick name. Link to comment Share on other sites More sharing options...
Silver Fox 17 Posted November 8, 2022 Share Posted November 8, 2022 I see in your screen shot there is a link at the bottom to My Dashboard. If you click on that you should be able to click on 'Community' on the right. At the bottom of that page you can change your nick name. Thank you, managed it now. Garry Link to comment Share on other sites More sharing options...
Brew Man Posted November 8, 2022 Share Posted November 8, 2022 @Silver Fox 17 thumbsup Link to comment Share on other sites More sharing options...
Fishmanoz Posted November 8, 2022 Share Posted November 8, 2022 David_W, I think you’ll find the R6 is purely to bring points/crossings back to parallel and matching the length of the point + 166mm straight. You can of course use it to make up a full/part loop but you’ll need lots of them as it is only 15 degrees. Link to comment Share on other sites More sharing options...
JCM1707818838 Posted December 2, 2022 Share Posted December 2, 2022 apologies… I’m a newbie!Is TT:120 compatible with the HM DC app system?are there plans to include TT:120 track in the layout planning in the app? Link to comment Share on other sites More sharing options...
Fishmanoz Posted December 2, 2022 Share Posted December 2, 2022 Question 1 - Yes, already discussed. See https://uk.hornby.com/community/forum/hmdc-control-of-tt120-331793?ccm_paging_p=1#end-of-repliesQuestion 2 - wait until RAF96 comes along, he will have an authoritative answer on this. Link to comment Share on other sites More sharing options...
rman Posted December 8, 2022 Share Posted December 8, 2022 So when exactly in December are Hornby TT going to be released? Link to comment Share on other sites More sharing options...
TT-Man Posted December 8, 2022 Share Posted December 8, 2022 Short answer, they are probably not.Currently the only item that might be dispatched in December is the Scotsman set. The chances of receiving anything in December depends on if the boat docks on schedule (14th December), if its unloaded on schedule, if it clears customs quickly, if the stock can be moved to Hornby's logistics centre, if the orders can be packed and collected by the carrier, if the carrier can deliver during the Christmas rush. Good luck.Hornby have said that other items will be released as soon as possible in the New Year.I'm expecting some of my pre-orders (as well as track once it can be ordered) to arrive late January or in February. Link to comment Share on other sites More sharing options...
Yelrow Posted December 8, 2022 Share Posted December 8, 2022 Only takes the dockers to come out in sympathy with railmen etc, for it to be a whole new ball game. Link to comment Share on other sites More sharing options...
Nic1823 Posted December 8, 2022 Share Posted December 8, 2022 Sounds like we need some more of Santa's elves to get involved... hohoho! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now