Martin-369195 Posted September 9 Share Posted September 9 Perhaps I'm being more stupid than usual but I cannot see a link to this wonderful resource. Link to comment Share on other sites More sharing options...
LTSR_NSE Posted September 9 Share Posted September 9 (edited) I’ve asked the mods to correct the link as it’s now over an hour since Greg posted it. Correct link is: https://tt120resourcehub.mobirisesite.com/ Edited September 9 by LTSR_NSE Link to comment Share on other sites More sharing options...
GMD Posted September 9 Author Share Posted September 9 Thanks @LTSR_NSE had I a brain I'd be dangerous... 3 Link to comment Share on other sites More sharing options...
96RAF Posted September 9 Share Posted September 9 1 minute ago, GMD said: Thanks @LTSR_NSE had I a brain I'd be dangerous... Sorted by RB51 2 Link to comment Share on other sites More sharing options...
Trevor-353714 Posted September 9 Share Posted September 9 Can I propose that we as the TT120 community, to thank Greg for his efforts for us all, raise the money to have the banner removed? At no cost to himself. Does anyone know how to do such things? I would chip in £10. 2 Link to comment Share on other sites More sharing options...
ukpetey Posted September 9 Share Posted September 9 I think it’s a fantastic resource Greg and I wish it had been available 3 months ago when I started. Very impressive. Thank you Link to comment Share on other sites More sharing options...
GMD Posted September 9 Author Share Posted September 9 3 hours ago, Trevor-353714 said: Can I propose that we as the TT120 community, to thank Greg for his efforts for us all, raise the money to have the banner removed? At no cost to himself. Does anyone know how to do such things? I would chip in £10. This is very kind indeed Trevor - but I am more than happy to look at this myself. I know the banner is annoying, so will work to get in removed when funds allow. The Hub is there to try and help us modellers to get the models they want, so please keep your spending money for the models listed! If it goes really well I will get a little bit of Great British Pounds via the affiliate Hornby links. 4 Link to comment Share on other sites More sharing options...
GMD Posted September 9 Author Share Posted September 9 50 minutes ago, ukpetey said: I think it’s a fantastic resource Greg and I wish it had been available 3 months ago when I started. Very impressive. Thank you Thanks @ukpetey - For anyone starting out there is certainly no shortage of choice! 1 Link to comment Share on other sites More sharing options...
Leslie-359394 Posted September 10 Share Posted September 10 This resource is going to be invaluable to me as a newbie to the hobby. Would it be possible to have a section as “Service” or something similar to show some of the excellent tutorials from YouTuber’s? ie: Matt at Highfell with his excellent tutorial on core motor upgrade. Richard at TWW with his upgrade to the prop shaft issue on the Class 50. Peachy with his videos on power banks. This will be information I will need in the future and it would be useful to find this information in one place. Link to comment Share on other sites More sharing options...
GMD Posted September 10 Author Share Posted September 10 Thanks for the suggestion @Leslie-359394 - I can certainly look into it for a future update! Also, I have added a few extra links for suppliers to the site, so thanks to those who have helped keep me updated and made suggestions. Link to comment Share on other sites More sharing options...
Simon M Posted September 10 Share Posted September 10 Top job Greg - just what we all need - the go to place for all things TT. Great idea and looks great also (apart from fighting off the annoying banner!) but as a community I am sure we are all willing to contribute if that helps or for further development? as an additional link on Buildings you may want to consider Scalescenes, not everyone's cup of tea, but all the OO range printed at 63% works great for TT and good value. 2 Link to comment Share on other sites More sharing options...
GMD Posted September 10 Author Share Posted September 10 Very kind Simon - hopefully it proves useful for everyone. Very kind to offer to help re the banner, but please do not be offended if I refuse! The site is done to help everyone buy the TT stuff they want, not to siphon off funds from modelling. As for Scalescenes - thank you for that - I will check them out! 4 Link to comment Share on other sites More sharing options...
GMD Posted September 11 Author Share Posted September 11 Some mild updates now live - Index of Manufacturers has been added (this is simply an alphabetical list, not hyperlinked), accessed via the front page. Also added a few more producers and retailers. 1 Link to comment Share on other sites More sharing options...
AV59 Posted September 11 Share Posted September 11 17 hours ago, GMD said: As for Scalescenes - thank you for that - I will check them out! I can also recommend Scalescenes my layout is totally based on their buildings and others built from their Scratchbuilders yard including my house . Now just need my freshly broken collarbone to heal after falling off my bike , I was in the middle of a track redsign so can't even run trains while waiting . 1 Link to comment Share on other sites More sharing options...
Rallymatt Posted September 11 Share Posted September 11 Hope it mends fast! Link to comment Share on other sites More sharing options...
GMD Posted September 11 Author Share Posted September 11 @AV59 and @Simon M Thanks to you both for the reminder - have now added Scalescenes to the buildings page. Also added another three or four retailers. Keep 'em coming! 1 Link to comment Share on other sites More sharing options...
dBerriff Posted September 11 Share Posted September 11 Slightly off-centre but Roads and Rails in Leeds is actively supporting HM7000 and might be gaining some knowledge of TT:120 DCC installs. He is active on Facebook. https://www.roads-and-rails.co.uk Link to comment Share on other sites More sharing options...
GMD Posted September 12 Author Share Posted September 12 Helpful to know @dBerriff - will check it out. Don't want to stray too far beyond the TT120 remit, or else it will become unwieldy for users, but I will certainly have a look. What do folk think is best - include some relevant stuff that is not strictly TT120, or keep it tightly focussed? Happy to go with what works best for users. 1 Link to comment Share on other sites More sharing options...
RB51 Posted September 12 Share Posted September 12 Unless there is a clear TT120 connection I personally I think it would be better to keep the resource TT120 focused. It would be preferable to not get into a situation where topics need splitting out to their own thread if it can be avoided. 2 Link to comment Share on other sites More sharing options...
Rallymatt Posted September 12 Share Posted September 12 I’m sure that there is more than enough work involved in just keeping track of the pure TT:120 content. Anything more DCC or HM 7000/DCC and TT:120 can be found via searches on Google or YouTube etc. Link to comment Share on other sites More sharing options...
GMD Posted September 12 Author Share Posted September 12 One of you kind folk pointed me towards MDN Designs for 3d printed detailing, which I added to the site yesterday. Got an email today from MDN saying they have just uploaded pre-orders for multiple TT120 wagons, a tanker, conflated wagon and vent van. These are unpainted and without axles or couplings for now. The link is here: https://www.mdndesigns.com/railwayscenery It has also been added to the freight page of the Resource Hub. Just to clarify that I have no association or affiliation again. Just always good to see more coming our way in TT120. Thank you to both RB and RM for responding to my query - I think it confirms my own thinking to keep it as much direct TT120 content as is possible. 2 Link to comment Share on other sites More sharing options...
Dodge1965 Posted September 12 Share Posted September 12 One YouTube Channel is missing, Highfell. He does more than me and 100% TT120. Im sure others would agree he should be near the top or first. If no space, please remove mine, as i add little value to TT120. 1 Link to comment Share on other sites More sharing options...
GMD Posted September 12 Author Share Posted September 12 @Dodge1965 Very generous of you to offer to relinquish your space. As said in the intro video I think it was, my intention is to swap out YouTubers so that plenty others get their turn. I have deliberately not included all of the more prominent ones to allow for rotation. 1 Link to comment Share on other sites More sharing options...
Rallymatt Posted September 12 Share Posted September 12 Your contribution @Dodge1965 is valuable, especially as a modeller new to the hobby 😁👍 Link to comment Share on other sites More sharing options...
LTSR_NSE Posted September 12 Share Posted September 12 I realise this may be a wishlist item that will only be available in the future - but am posting here just in case anyone on this forum is already aware of a supplier of the following: One thing I would love to see on this fantastic resource is somewhere to purchase TT:120 (or at least 12mm gauge) wheels, axles, & even complete wheelsets. (In an ideal world somewhere that offers an online sales option would be preferable - but anything would be great currently!) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now